Beitian BN-880 GPS and Compass Module

The BN-880 is a full sized GPS module with compass that's perfect for any build requiring rock-solid performance with a fast GPS sync due to the larger antenna size vs the BN-220 and similar smaller modules.

Features:
Dimension: 28mm*28mm*10mm
Weight: 11.8g
Connector: 1.25mm 6pins connector

Specification
Chipset: M8030-KT
Receiving Format: GPS, GLONASS, BEIDOU, GALILEO, SBAS, QZSS.
Frequency: GPS L1, GLONASS L1, BEIDOU B1, GALILEO E1, SBAS L1, QZSS L1
Channels: 72 Searching Channel

Sensitivity
Tracking: -167dBm
Reacquisition: -160dBm
Cold start: -148dBm
Hot start: -156dBm

Accuracy
Position Horizontal: 2.0 m CEP 2D RMS SBAS Enable (Typical Open Sky)
Velocity: 0.1m/sec 95% (SA off)
Timing: 1us synchronized to GPS time
Acquisition Time
Cold Start: 26s
Warm start: 25s
Hot start: 1s

Data output
Support Rate: 4800bps to 921600bps, Default 9600bps
Data Level: TTL Level
Data Protocol: NMEA-0183 or UBX, Default NMEA-0183
Update Rate: 1Hz-10Hz, Default 1Hz
NMEA Message: RMC, VTG, GGA, GSA, GSV, GLL
FLASH: 4M FLASH, Store the configuration permanently

Operational Limits
Altitude: 50,000m Max
Velocity: 515m/s Max
Acceleration: Less than 4g

Power Consumption
VCC: DC Voltage DC Voltage 3.0V-5.5V,Typical: 5.0V
Current: Capture 50mA/5.0V

Environment
Operating temp:　-40 °C ~ +85°C
Storage Temp: -40°C ~ +105°C

Built-in LED:
TX LED: blue. The data output, TX LED flashing
PPS LED: red. PPS LED not bright when GPS not fixed, flashing when fixed

Compass
built-in compass with electronic compass IC HMC5883L

Pin Description:
1: PIN SDA: Compass SDA
2: PIN GND: Ground
3: PIN TX: serial data output.
4: PIN RX: serial data input.
5: PIN VCC: 3.0 V-5.5V supply input, Typical: 5.0V
6: PIN SCL: Compass SCL

Packaging List
1x BN-880 GPS Module
1x 15cm Cable